Hello,
I'm using cycle840 and when I'm programming it I have different things to choose: Security distance, angle,.... The last parameter is sense of rotation between one tapping and the next one. Options are M3, M4 and M5. When I choose M5, the second tapping is not working. Machine is waiting. I use:
T="100140"
N20 M6
N25 D1
N30 s20m3
N35 f1000
N40 G00 X0 Y0
N45 MCALL CYCLE840(10,0,4,,10,0,0,3,20,,1.25,0,1,0,,"ISO_MET RIC","M8",,1001,1)
N50 G00 X0 z0
N55 G00 X10 z0
N60 G00 X20 z0
N65 MCALL
N70 m30
in 840D SL with PCU 50.5
I'm a service Electronic, not programmer.
Thank you for your support,
Mikel