584,849 active members*
3,817 visitors online*
Register for free
Login
Results 1 to 6 of 6
  1. #1
    Join Date
    Aug 2007
    Posts
    18

    bobcad and fanuc L

    anybody using version 21 to program a fanuc model L 4 axis or similar. ARE THE STANDARD POST GOOD OR NEED TWEAKING

    KEITH

  2. #2
    Join Date
    Aug 2008
    Posts
    403
    If its a elox L GENERIC FANUC post will work if you need I have one

  3. #3
    Join Date
    Aug 2007
    Posts
    18
    no it is a fanuc model l mid 1980s with i think a fanuc 6 control

    keith

  4. #4
    Join Date
    Aug 2008
    Posts
    403

    posts

    Posts should still be okay I used a generic fanuc post on a modle L you have no auto thread no tank fill or any of the morden things post are used for .What is the problem you are having with the post you have now ?????

  5. #5
    Join Date
    Aug 2007
    Posts
    18
    hi,
    no problems yet as i am still waiting to commission the wirer. bought the bobcad about 2 yr ago and never even installed it. keep seeing the bad press it gets and was being cautious.

    keith

  6. #6
    Join Date
    Aug 2008
    Posts
    403
    I use version 16 ...it is very simple to use ...especially on older machines......I DONT LIKE the newer versions

Similar Threads

  1. BobCAD to Solidworks (For sale BobCAD)
    By Robert Lewis in forum BobCad-Cam
    Replies: 3
    Last Post: 05-11-2009, 10:04 AM
  2. Need Post-Bobcad V22 to Fanuc 10M Mill
    By steppshann in forum BobCad-Cam
    Replies: 4
    Last Post: 07-11-2008, 04:00 PM
  3. BobCad offer to end all Bobcad Offers
    By Syil_Australia in forum News Announcements
    Replies: 0
    Last Post: 02-02-2007, 12:07 AM
  4. bobcad to fanuc 3m
    By Gpestarters in forum BobCad-Cam
    Replies: 17
    Last Post: 07-26-2006, 07:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •