[Sonnee]

Hello

I bought a CNC turning machine Syil C6 with CNC Super Box and the Mach3 controller software.
Does anybody happen to know the correct PIN settings for the output signal for X and Z axes and also PIN settings for the spindle speed indication?

Regards, Sonnee

[InTex]

Hello

I bought a CNC turning machine Syil C6 with CNC Super Box and the Mach3 controller software.
Does anybody happen to know the correct PIN settings for the output signal for X and Z axes and also PIN settings for the spindle speed indication?

Regards, Sonnee

Hello

Motor output

X-axis ---- Step Pin# =3 Dir Pin# =2

Z-axis ---- Step Pin# =5 Dir Pin# =4

Output signals

Output1 ---- Port# =1 Pin number =14
Output2 ---- Port# =1 Pin number =17

Spindle relay settings

Clockwise rotation (M3) – output# =1
Counter clockwise rotation (M4) – output# =2

These are my settings shown in a test of 2-axial controlling card.

Regards, InTex

[Sonnee]

Hello

Motor output

X-axis ---- Step Pin# =3 Dir Pin# =2

Z-axis ---- Step Pin# =5 Dir Pin# =4

Output signals

Output1 ---- Port# =1 Pin number =14
Output2 ---- Port# =1 Pin number =17

Spindle relay settings

Clockwise rotation (M3) – output# =1
Counter clockwise rotation (M4) – output# =2

These are my settings shown in a test of 2-axial controlling card.

Regards, InTex

Hello

Unfortunately, the machine still doesn’t work. None of the axes wants to move.
What can be the reason?

Regards, Sonnee

[InTex]

It can have a lot of reasons. Motor current settings. Does your parallel cable suit? I don’t know where you bought the machine.
Do your stepper have a noticeable holding torque? Does the logic power work?
You didn’t give us really enough information saying that you need PIN settings. It would be nice to know more details.