513,202 active members
3,682 visitors online
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Hello guys

    I’ve got the following problem. I need cutting values, covering depth, feeding for 1.4301.

    Side milling cutter Du. 125 with solid carbide turnover boards.

    I have to mill a slot with the depth of 32mm.

    Thanks in advance and I hope that someone can help.

    Regards, Dimi

  2. #2
    Hello
    Try to get out by the manufacturer of the side milling cutter:

    1. whether it’s suitable for 1.4301
    2. if it is, then with what speed

    You’ll have to decide about the feeding depending on the covering depth

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •