585,919 active members*
3,446 visitors online*
Register for free
Login

Thread: 1.4301 milling

Results 1 to 2 of 2
  1. 02-04-2010, 06:11 PM #1
    dia
    dia is offline
    Join Date
    Nov 2009
    Posts
    2
    Hello guys

    I’ve got the following problem. I need cutting values, covering depth, feeding for 1.4301.

    Side milling cutter Du. 125 with solid carbide turnover boards.

    I have to mill a slot with the depth of 32mm.

    Thanks in advance and I hope that someone can help.

    Regards, Dimi
    Reply With Quote Reply With Quote
  2. 02-05-2010, 08:16 PM #2
    millingcutter
    millingcutter is offline
    Join Date
    Oct 2006
    Posts
    141
    Hello
    Try to get out by the manufacturer of the side milling cutter:

    1. whether it’s suitable for 1.4301
    2. if it is, then with what speed

    You’ll have to decide about the feeding depending on the covering depth
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules