508,028 active members
2,374 visitors online
Register for free
Login
IndustryArena Forum > GENERAL MANUFACTURING PROCESSES > DRILLING > Manufacturing of ejector bores
Results 1 to 2 of 2
  1. #1

    Join Date
    Dec 2002
    Posts
    27
    Hello guys

    I’d like to know how you make your ejector bores.
    Do you drill with carbide borers and if you do, then softly or toughly?
    What experience have you had with it?

    Regards, Jens

  2. #2

    Join Date
    Jun 2005
    Posts
    477
    We bore our ejectors a millimeter smaller, additionally up to 30mm before the contour, a millimeter bigger. When the contour is hardened and everything is sharpened and milled, we finish the bores on a wire-eroding machine. We drill with HSS and carbide, depending on possibilities.
    Let there be rock!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •