hello ........FROM GREECE

i have one trumpf tc 260.....WITH CC220

first I had problems with error 277
I change all the batteries (three batteries) and i made reload....377

1- AUS EEPROM
2 - inter password 377
3- wait one Minute
4- the soft key Rest will appear
5-select RESET......

AND RELOAD 281 FROM EPROM

Now I have the error 2670
-NC-FAULT 2670 - SPS TIME INHIBIT
- PANEL FAULT- CLOCK POWER FAIL.

AND THE LED READY 2 NOT LIT...ΙΝ ΤΗΕ POWER SUPPLY


I read the manual and i saw that has to do with plc
and battery...

I HAVE CHANGED THE BATTERIES....BYT I DONT HAVE RECHARGE VOLTAGE ΟΝ ΤΗΕ BATTERIES..
MY VOLTAGE INSIDE THE POWER SUPPLY IS OK +15V..-15V.. 5V..2.7V...


After RELOAD 377 FROM EEPROM .... the file L444 does not exist
I Create a folder L444 with text and i make activation.....
Do I need to set the folder l444....??


there is another solution ;;


if you have something to recommend me

With kind regards
BELIOS JIM ELECTRICAL ENGINEER