[bryanoates]

Long time lurker here, first time post. These are parts I purchased to retrofit an old CNC knee mill. Parts have been installed in an electrical panel but never used or had power applied to them. I decided to not do the project and to buy a HAAS machining center instead. I have invested over $1600 in this package. Will sell for $1100 Shipped Cont US.

eBay listing here Nema34 1600oz Smooth Stepper Breakout Board CNC Kit MPG Pendant VFD Digital RJ45 | eBay

Parts list:
3 - Leadshine AM882 Digital Stepper Drives
3 - 1600oz NEMA 34 Stepper Motor, 150mm, 7.1A or 3.5A 8 wire
1 - C32 Dual Port Multifunction CNC Breakout Board w/rj45 connectors from cnc4pc.com
1 - USB SmmothStepper from cnc4pc.com
3 - C34kl Driver to RJ45 Adapters
1 - 5HP 4kw VFD Motor Drive
1 - KL-7220 Keling Unregulated Power Supply 1440W, 72VDC/20A ,120VAC or 230VAC
1 - MPG2 Pendant from cnc4pc.com
7 - Variable length RJ45 Cables


Attachment 242610
Attachment 242612
Attachment 242614
Attachment 242616
Attachment 242618
Attachment 242620
Attachment 242622
Attachment 242624
Attachment 242626
Attachment 242628

[zanst]

how to built this board

[bryanoates]

I am def not an expert on builing a CNC as this was my first attempt and didn't complete the project. All of the instructions can be found here CNC4PC

Thanks, Bryan

[bryanoates]

This is still available. Price reduced to $750. Nema34 1600oz Smooth Stepper Breakout Board CNC Kit MPG Pendant VFD Digital RJ45 | eBay