584,808 active members*
5,016 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    Aug 2004
    Posts
    98

    Favorite G offset?

    I just wanted to d a small poll here. I am sure there are plenty of industry types that use G54-G58 everyday Everyone has a favorite!! I was taught to use G55 in College, but I REALLY love G56 for some reason... maybe its how my fanuc controller is setup, I run a Komo 12'X2'Y travel :P GO G56!!!! :banana:

  2. #2
    Join Date
    Jan 2006
    Posts
    4396
    G57, because there is a lucky number "7". :cheers:
    Toby D.
    "Imagination and Memory are but one thing, but for divers considerations have divers names"
    Schwarzwald

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

    www.refractotech.com

  3. #3
    g54 default

  4. #4
    Join Date
    Mar 2004
    Posts
    1804
    Because I have "standardized" my setups

    G53 -machine
    G54 -Part
    G59 -Where I do a tool change
    Art
    AKA Country Bubba (Older Than Dirt)

  5. #5
    Join Date
    Mar 2005
    Posts
    988
    G54.1 P21......

    Not sure why ....... Next month might be something different.....
    It's just a part..... cutter still goes round and round....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •