I was wondering if anyone uses the MAXNC DLX control software by Max NC http://www.maxnc.com/page2.html. I have seen a few post with questions about MaxNC, but have not seen many reponses. I was wondering does it work with any control set up or just there own brand? The way it reads it will work with any. If any one uses it how do you like it? Thanks- Robbie
Thread: Anyone use MaxNC
Results 1 to 5 of 5
-
08-14-2006, 05:14 PM #1
Moderator
- Join Date
- Feb 2005
- Posts
- 921
Anyone use MaxNC
Robbie
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
08-14-2006, 05:25 PM #2
Moderator
- Join Date
- Feb 2005
- Posts
- 921
One more question. I can't seem to find a e-mail address on their website. Does anyone have one that they know of? Thanks - Robbie
Robbie
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
08-14-2006, 05:42 PM #3
Registered
- Join Date
- Feb 2006
- Posts
- 72
Rob,
Try here http://www.positiveflow.com/maxhelp.htm They may be able to help.
I, myself, have never used MaxNC. Sorry.
-
08-14-2006, 10:10 PM #4
Moderator
- Join Date
- Feb 2005
- Posts
- 921
Thanks for the link.
Robbie
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
08-14-2006, 10:19 PM #5
Moderator
- Join Date
- Feb 2005
- Posts
- 921
Thats kind of missed up, I just noticed they sell a MaxNC Demo video for $39.00. Even if you buy a machine you only get 50% back. Most companies give away the demo videos free even before the product is bought.
Robbie
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With Quote
Posting Permissions
