584,805 active members*
5,350 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2006
    Posts
    478

    Fanuc / Toyoda FA630

    We have a 1995 Toyoda FA630 with a Fanuc 15m control. The Fanuc manual says it should be able to use G95 (feed/rev.). The toyoda manual says "G94 = feed inchs per. minute - G95 = feed" and thats it. When I try to feed with G95 it just sits there w/cycle start light lit and no motion. Any insight in this area would be apprieciated.


    A.J.L.


    P.S. is there any way to know what options this machine has via. the control or otherwise?

  2. #2
    Join Date
    Oct 2003
    Posts
    263
    We had to pay extra for the G95 option on Toyoda and Okuma & Howa horizontals (16M, 2001-2002).

    The Okuma & Howa guy thought my demand for G95 was ridiculous ("everybody uses inches per minute"). What a crock.
    Software For Metalworking
    http://closetolerancesoftware.com

  3. #3
    Join Date
    Jun 2006
    Posts
    478
    a crock is right G94 should be the option

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •