Hi my names Andy, I have just purchased a Chinese 3020 cnc, and will be playing at making circuit boards etc. I have been in engineering for over 35years but am still willing to learn. Bring on the fun.
Thread: never to old to learn
Results 1 to 3 of 3
-
07-28-2014, 07:48 PM #1
Registered
- Join Date
- Jul 2014
- Posts
- 3
never to old to learn
-
07-28-2014, 08:04 PM #2
Member
- Join Date
- Apr 2004
- Posts
- 5737
Re: never to old to learn
Does the thing seem to work? Or is your project to make new circuit boards for your 3020?
-
07-28-2014, 08:17 PM #3
Registered
- Join Date
- Jul 2014
- Posts
- 3
Re: never to old to learn
Hi awerby. The 3020 I have working in the shack, driven by an old tower computer running Mach3. I am just getting into the set-up and playing with the software, but will at some time be machining my own circuit boards for other projects.
Similar Threads
-
Learn IGF One touch or Learn a CAM?
By brettcnc in forum OkumaReplies: 9Last Post: 05-08-2012, 02:37 AM -
Which CAM should I learn?
By WOTDesigns in forum Tormach Personal CNC MillReplies: 22Last Post: 05-20-2011, 08:04 AM -
Trying to Learn CNC
By Getter-Done in forum Bridgeport / Hardinge MillsReplies: 2Last Post: 05-19-2011, 12:11 PM -
Where can I learn?
By RySNow in forum Mechanical Calculations/Engineering DesignReplies: 8Last Post: 02-22-2010, 01:43 AM -
i have to learn this
By DragnsBane in forum CNC (Mill / Lathe) Control Software (NC)Replies: 2Last Post: 12-14-2007, 03:30 PM
Tags for this Thread
Posting Permissions
