True Machine is pleased to announce the release of their new CNC Software, BlueCNC4.

This product was developed over the last 9 months... and 1000's of hours of time. Built with Visual Studio C# programming... on the ".net 4.0" framework. Our software will run on Windows Xp and on Windows 7 computers. Our first package will be installed on WinXP in order to save our customers money. However, for an optional upgrade, the program has no problem running on Win 7. Tested on small intel industrial type computer, HP Desktop, and HP Laptop... all function very well.

BlueCNC4 uses GEdit with text highlighting for editing its GCode programs.

This is a Competent, Easy to use, 4 axis CNC Software. Built to use the already successful, Dynomotion.com, Kflop Motion control board. Our first package couples the Kflop board with 2 - C10 boards to make it easy to install. We are using 8 inputs and 8 outputs, and 1 output is reserved for spindle PWM out, to do spindle control, with the C41 card. The C10 and C41 interface boards are from CNC4PC.com Our first package we will sell, is setup for Step & Direction output. We will also be releasing packages for Analog controlled drives as well.

All BlueCNC4 buttons can be controlled with Keyboard, Mouse, or Touch Screen, making this one of the easiest CNC softwares to use today.
You can control your machine completely with the keyboard, without a mouse,... which is one of our softwares greatest features.

True Machine is offering a package deal. Computer, Motion Control, and Interface cards, already setup. All you do is provide a Keyboard and Monitor... and wire up the interface cards to your drives and controls, and away you go.

Setup is easy, you have one page of setup parameters. And then you have single "C" files, for spindle, homing, and special axis settings for the motion control. These can be edited using Windows Notepad, just like a text file. Again, very simple to do.

Go to True Machine for our introduction video, and many instructional video's.
True Machine

This product is being released over the next 30 days.

For more information, contact [email protected]

We are located in Ferndale, WA and Rome, GA.

I believe you are going to be very pleased with our new product... - Jeff Redington
Attachment 244662