584,857 active members*
4,604 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > Commercial CNC Wood Routers > 2006 machine motors are out of sync
Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2010
    Posts
    11

    2006 machine motors are out of sync

    i have a 5 x 12 router with a rotary and some time ago the z drive would trip "limit switch" if i ran it passed 50ipm and now the drive on the side opposite x0 y0 consistently runs 3/8 from the reset switch block no matter turning the machine off, clamping the switch closed, tighten the turn buckle and switch the machine on ... run a tool path and hit zero out and it is 3/8" from the limit stop

  2. #2
    Join Date
    Dec 2010
    Posts
    11

    Re: 2006 machine motors are out of sync

    should be august 2008 machine

Similar Threads

  1. Assistance comparing used machine specs for Joe's 2006
    By vthowe in forum Joes CNC Model 2006
    Replies: 1
    Last Post: 05-04-2012, 04:50 PM
  2. 2006 dmv diamond series is this a good machine
    By powerstream in forum Daewoo/Doosan
    Replies: 0
    Last Post: 07-06-2010, 09:05 PM
  3. Joe's 2006 Question on size of cutters machine will handle??
    By Rooney in forum Joes CNC Model 2006
    Replies: 4
    Last Post: 11-19-2009, 05:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •