First V Carve
Well here is my first shot at V carving. I think I am going to like this. The wood is Ash. I do not think this carves very well. I need. to find something better. Stained but no paint yet and not sanded. It was supposed to cut at .007 but I think it is deeper. I used a 1/16 Flat EM and a 30 degree V bit. It took about 45 minutes. It is on a 5.5 X 12 piece of ash. The engraved part is 5X8.In some places the wood chipped away.
Don
PS : This is also after a reinstall of Windows and Bobcad.
The time has come the woodworker said to speak of many things. 0f routers and Wood , chips and paints and stains and CNC and other things.