[shoot]

Does anybody have the pin out info for the dyna turret board theres 6 pins in total,also im looking for help on how I should go about wiring this as well as the 24v turret solenoid(2 wires red and black) to a pmdx 126 break out board.thanks all

[shoot]

I couldn't edit so will post pictures here
the turret board has 6 pins with 5 wires in the plug that fits it.
pin 1 green
pin 2 red
pin 3 black
pin no wire
pin cn-1 brown wire
pin white wire
Attachment 247952

[Fastest1]

Is yours an H model? That board looks different than mine. Shoot MRM a pm, he has great knowledge of this turret and its functions.

[shoot]

Thanks fastest,as far as I know its the standard 3000 which would be the smaller of the 2 if im right,unless there are others I don't know about.
it just reads 3000 on the board.
I did pester dyna US and china:stickpoke but yet to hear back,thanks.for the reply edit mrms inbox is full.

[shoot]

:cheers:A big thanks to Robert at dyna and steve at pmdx,i now have the drawings I need and a bit of direction.
I will put the drawings here ,they may help others.thanks all

[shoot]

Attachment 248082
Attachment 248084

[MRM RCModels]

You found a wiring diagram. Looks good.