[808knzbleu]

aloha,i am a newbie from hawaii and im stumped on how to install/configure the post processors from mastercam to my mach3 router.. i did copy the post processor thats on the mach3 site, but there is no mmd to go along with it. there probably is a post and answer within this forum but its way too big to scan thru every post. thanks in advance.

machine: ox (rotozip router) 3 axis stepper (slaved y)
controller : geckodrive g540 w/mach 3
computer & os: dell 32bit xp

[albert_chuy]

aloha,i am a newbie from hawaii and im stumped on how to install/configure the post processors from mastercam to my mach3 router.. i did copy the post processor thats on the mach3 site, but there is no mmd to go along with it. there probably is a post and answer within this forum but its way too big to scan thru every post. thanks in advance.

machine: ox (rotozip router) 3 axis stepper (slaved y)
controller : geckodrive g540 w/mach 3
computer & os: dell 32bit xp

Hi did you ever find the mmd file, Im in the same boat, Hope you can help me out, Thank you.