Hello,
I am new to "C" axis milling and can not get my head around how to work the feed rate out when both "C" & "Z" are being used to mill a profile on the face on a Doosan Puma 3100LM.
I have programmed the job and I am using G98 feed per minute or using G99 and millimetres a rev and the feed goes really crazy fast when going down the 25.5mm side (see DXF attached)
I would be extremely grateful for some assistance in showing me how to work this out.
I am not the brightest star in the galaxy if you know what I mean so a simple example would be appreciated.

kind regards Jon