Hi,
Can anyone help me? I have a Syil SX3 and CNC conversion kit which I have obtained with no information (just a pile of bits). I've almost completed the mechanical part and now I am wiring the electrical part. I would appreciate any information, wiring, drawings etc. I have an “East Crystal 5 Axis CNC board - Rev 1.4” and a “Spindle control card PCF Rev 1.4” which appears to have been modified.
Any help would great.
Cheers
Chris
Thread: SX3 CNC Home build info please.
Results 1 to 2 of 2
-
07-06-2014, 10:23 AM #1
Registered
- Join Date
- Apr 2011
- Posts
- 2
SX3 CNC Home build info please.
-
07-12-2014, 10:14 PM #2
Registered
- Join Date
- Jul 2004
- Posts
- 1424
Re: SX3 CNC Home build info please.
You are in the wrong forum. You have a SIEG SX3 (not a Syil). You can find lots of infor about doing the conversion if you search and/or repost this in the Benchtop SX3 forum:
http://www.cnczone.com/forums/x3-sx3-g0619-g0463/
Syil originally briefly sold a cnc'd version of the Sieg SX3 (IIRC), but then quickly branched to their own line of products, I believe in the 2008 time frame.
Reply With QuoteSimilar Threads
-
Gathering for new build, looking for info.
By onuxis in forum DIY CNC Router Table MachinesReplies: 4Last Post: 10-16-2012, 02:37 PM -
Any Info on the Build ?
By HobbieZones.com in forum DIY CNC Router Table MachinesReplies: 1Last Post: 12-25-2011, 02:33 AM -
Need new info CNC build
By CNC2Z in forum Benchtop MachinesReplies: 3Last Post: 11-11-2009, 07:03 AM -
Looking for Oxy/Acetylene cnc table build info
By ric812 in forum Waterjet General TopicsReplies: 3Last Post: 08-26-2009, 02:46 AM
Tags for this Thread
5 axis,
5 axis cnc,
axis,
bits,
board,
build,
cnc,
cnc board,
cnc conversion,
control,
conversion,
crystal,
electrical,
home,
info,
information,
kit,
mechanical,
rev,
sx3,
syil,
wiring
Posting Permissions
