Re: CL-2MD - 5 Axis Make it to work
You aren't in too much trouble unless you told them you are a 5-axis guru - clearly they don't know how to use it either! Step one I would think is to settle on a CAM package and have that supplier get you a good post processor. Without those pieces, the machine can't be expected to do "anything". 5-axis CAM is complex and expensive, and the pool of resources is not very large! I know a few packages that CAN work: MasterCam, BobCad, SprutCam, GibbsCam. I am sure there are more. Make sure you get a package that will offer you STRONG learning support because your learning curve will be HUGE for this task. Good luck, and don't put too much pressure on yourself - they want you to feel it is "your fault" for not knowing answers that they don't know theyselves, and your management likely has no idea how difficult learning 5-axis programming is going to be!
CAD, CAM, Scanning, Modelling, Machining and more. http://www.mcpii.com/3dservices.html