[dhardt]

Hello Darryl, I am wondering if you (or anyone on this list) has a manual for a Puma 8HC-3A ~1996 from DAEWOO, now Doosan. I have the operator's manual for the 16T FANUC control on the machine. I have run into a bunch of questions that are not answered in the FANUC manual, and am told that I need to ask the manufacturer. When I have questions about the FANUC controller, FANUC is awesome, but if it involves the operation of the spindle or tailstock I am told to contact the manufacturer of that part of the machine.

The machine predates the time that Doosan started creating MTE manuals, (Maintenance Technical English) and ISE manuals (Install Service English) so the only manuals available are the ones that originally were sent with the machine. These have actual part numbers to there editions that are sorted by Machine Serial Number.
Please contact you local dealer to purchase replacement manuals of PLE (Parts List English) OPE (Operation Programming English) INE (INstruction English) or the Electrical Diagram (which has its own code format to its version.

[dhardt]

Hi,

thank you for providing the maintenance manual for the Puma 240M - it was of great help.

Do you also have a maintenance manual for Puma 2600LM and Puma 3100Y, year of manufacture 2012?

Thanks in advance!

I have an MTE manual for the smaller version of both of those machines. The Puma 2100. The procedures are very similar, but any parts referenced would need verification from the correct parts manual.

The file is too large to attach here. If still needed, please email me a request at the email address in the footer of any one of my posts.

[dhardt]

I need parts manuals for the following

DMV 5025/50 SN AV630826

DMV3016L SN MM4100395

Thanks

The parts manuals are one of the ones that originally were sent with the machine. These manuals have actual part numbers to there editions that are sorted by Machine Serial Number.
Please contact you local dealer to purchase any replacement manuals of PLE (Parts List English) OPE (Operation Programming English) INE (INstruction English) or the Electrical Diagram (which has its own code format to its version.

[dhardt]

I need parts manuals for the following

DMV 5025/50 SN AV630826

DMV3016L SN MM4100395

Thanks

Added note: I can post or email small sections of the parts manuals to assist with an immediate repair, but entire manuals need to be ordered from your local dealer, please.

[dhardt]

I have to change the spindle's encoder belt on my Mynx 500.
Is the 650 has similar spindle to 500?
If you have something it would be great!
Thank you!

That Mynx 500, does its serial number begin with AV5E?
It comes in a #40 taper, a #50 taper, and each version had either with or without through spindle coolant...Which is yours?


Attached is a visual comparison of the Mynx 650 structure to the AV5E 40 taper with TSC

[juanjome]

I am looking for service literature for a Daewoo Mynx 500 with -Fanuc 21-M Series CNC Control, with parameters

[JanRysselPaulsen]

Hi dhardt
any chance you got the komplete keep relay descriptions list for doosan ST20G swissturn year 2012/2013
the manual delivered with the machine stops at K13.0
bedst regards Jan

[Mach1ne]

Hello Daryll, Is there a maintenance manual available for the Lynx 220 LM C axis lathe?
Cheers
Dean Davidson

[desertratt]

Hi, were you able to find this information? I am facing a similar situation.

[MrBates]

Evening.

I have an issue with Doosan HM 1250 ATC. For some reason it has lost few of it's home positions, waiting pot and 180 turning arm.(also there's an issue with the arm rotating on it's own when hydraulics are on)
Looking for maintenance manual for the ATC.


Thanks for the help in advance!

[Basham]

Hi
I need maintenance manual cnc lathe
Doosan turn4 please help me

[dhardt]

Hi dhardt
any chance you got the komplete keep relay descriptions list for doosan ST20G swissturn year 2012/2013
the manual delivered with the machine stops at K13.0
bedst regards Jan

As the swiss turns are not sold in the Americas, I do not have access to anything Swissturn
Except this:
https://drive.google.com/file/d/1F66...ew?usp=sharing

[dhardt]

Evening.

I have an issue with Doosan HM 1250 ATC. For some reason it has lost few of it's home positions, waiting pot and 180 turning arm.(also there's an issue with the arm rotating on it's own when hydraulics are on)
Looking for maintenance manual for the ATC.


Thanks for the help in advance!

All things HMC1250 (machine and ATC)
https://drive.google.com/file/d/11Z8...sp=sharing,%20

https://drive.google.com/file/d/124b...sp=sharing,%20

https://drive.google.com/file/d/17Mr...ew?usp=sharing

[dhardt]

Hi
I need maintenance manual cnc lathe
Doosan turn4 please help me

Unfortunately, that machine precedes the time that we have created Service Manuals, so I have nothing on it.

[dhardt]

Hi, were you able to find this information? I am facing a similar situation.

Without a text quoted in your request I have no reference as to what your "similar situation" is...

What is the issue you are having?

[tecram]

Hi i need maintenance manual for Puma MX2500LST
Thanks

[Reynabmg]

Hello friend, Doy ou have the DMN5700 Installation and Operational manual available?. Thanks and best regards.

[Jsb67]

Do you have manuals for daewoo solar 220 LC-V excavator? Operators manual and shop/service manual

[dhardt]

Do you have manuals for daewoo solar 220 LC-V excavator? Operators manual and shop/service manual

You are on a CNC machine forum. Looking for an Excavator Manual?

You might want to call Doosan Heavy Industry (678) 714-6000

[dhardt]

Hello friend, Doy ou have the DMN5700 Installation and Operational manual available?. Thanks and best regards.

Again, I'm adding a link to every manual I have:
https://drive.google.com/drive/folde...NC?usp=sharing

- - - Updated - - -

Hi i need maintenance manual for Puma MX2500LST
Thanks

This is the link to every manual I have:
https://drive.google.com/drive/folders/1e_b5Vm8ke3gkChkGyQe69efMeBknXoNC?usp=sharing