584,849 active members*
4,003 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > Does anyone need service manuals for popular Doosan Machines?
Page 6 of 9 45678
Results 101 to 120 of 179
  1. #101
    Join Date
    Feb 2013
    Posts
    788

    Re: Does anyone need service manuals for popular Doosan Machines?

    Quote Originally Posted by mbservice View Post
    Hi D Hardt
    Do you have the programming manual for a Lynx 220LMS
    We have the others but are missing this
    The Doosan Operations Manual that came with the machine?
    The Fanuc Programming Manual that came with the machine?

    These are Doosan or Fanuc parts that are sold. The revenue from these manuals helps to pays for the respective companies to assist their customers with informative manuals and competent personnel that are able to go onto forums and assist those customers.

    Please contact your local dealer with the serial number of your machine and they can get you a quote on replacement manuals.

    I have NON-Part/NON-revenue manuals available (they cover a wide variety of uses. From repair to operation, and most are better oriented toward learning than the original manuals that ship with the machine.



    The Parts Book, The Electrical Book, The Instruction Manual, and The Operations Manual: all ship with the machine and are considered a "PART" which is sold. I CAN NOT PROVIDE THOSE HERE.
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  2. #102
    Join Date
    Feb 2013
    Posts
    788

    Re: Does anyone need service manuals for popular Doosan Machines?

    Quote Originally Posted by T_clark View Post
    Hi I was wondering if I could get ANY information you have on a Doosan HP4000II? anything would be greatly appreciated!

    Thanks!
    Of the HP series, the most popular model is the 5000.

    Most additional manuals use that machine as the reference material.
    The procedures would be similar, but the part number would not be the same (correct part numbers would be gathered from the machine's parts manual)
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  3. #103
    Join Date
    Feb 2013
    Posts
    788

    Re: Does anyone need service manuals for popular Doosan Machines?

    Quote Originally Posted by Cml325 View Post
    Hi , I'm also looking for a manual for
    Daewoo DMV3016L for info on machine teardown for a spindle removal/installation.
    Thanks, Cliff
    The spindle section of this manual should be similar. (Note: Use the part numbers and process confirmation that you get by cross-referencing this information with your parts manual.
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  4. #104
    Join Date
    Feb 2013
    Posts
    788

    Re: Does anyone need service manuals for popular Doosan Machines?

    Quote Originally Posted by Louis_amecpro View Post
    DHardt,

    We are in need of any/all manuals for Doosan S310N (Serial number LSA1226). Right now, we have only the electrical manual and Fanuc controller manual for this machine.

    Local dealer tells us the manuals are no longer available for sell.

    I know the machine is old but I hope you can help getting manuals in any way.

    Regards,

    Louis Gauthier
    I have found a couple of available manuals that might be a potential match, or at least similar for your machine:

    Potential of Electrical Manual:
    If a Fanuc 0i-TB control: S280NHW
    If a Fanuc 0i-TC control: S310NHW

    Potential of Operations, Instruction, and Parts Book: S310NMLE

    There is no guarantee that these will match your serial number; they are the only manuals available for the old S310 series.
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  5. #105
    Join Date
    Jul 2005
    Posts
    380

    Re: Does anyone need service manuals for popular Doosan Machines?

    Quote Originally Posted by mbservice View Post
    Hi D Hardt
    Do you have the programming manual for a Lynx 220LMS
    We have the others but are missing this
    I can provide the manual we use in the training classes. It is comprehensive and well written. Let me know.
    PS - It's NOT the programming manual that came with the machine, BUT, it actually covers material in a better way, IMO.

  6. #106
    Join Date
    May 2016
    Posts
    526

    Re: Does anyone need service manuals for popular Doosan Machines?

    Hi D Hardt
    Do you have manuals for a Lynx 210 S/N L2002461 Y.O.M 2001
    It has a FANUC 21it controller

  7. #107
    Join Date
    Aug 2004
    Posts
    13

    Re: Does anyone need service manuals for popular Doosan Machines?

    Do you have manuals for DAEWOO PUMA 200C?

  8. #108
    Join Date
    Nov 2018
    Posts
    1

    Re: Does anyone need service manuals for popular Doosan Machines?

    dhardt,

    I need a full set of manuals for a 12S-B lathe.
    Serial number PS100977.
    Fanuc O-T control
    I do not need programming or operation manual.
    Need parts manual, maintenance manual and especially electrical.
    I purchased the machine and the manuals were lost during shipment.

  9. #109
    Join Date
    Feb 2013
    Posts
    788

    Re: Does anyone need service manuals for popular Doosan Machines?

    Quote Originally Posted by Tallg View Post
    dhardt,

    I need a full set of manuals for a 12S-B lathe.
    Serial number PS100977.
    Fanuc O-T control
    I do not need programming or operation manual.
    Need parts manual, maintenance manual and especially electrical.
    I purchased the machine and the manuals were lost during shipment.
    The Parts Book, The Electrical Book, The Instruction Manual, and The Operations Manual: all ship with the machine and are considered a "PART" which is sold. I CAN NOT PROVIDE THOSE HERE.

    These are Doosan parts that are sold. The revenue from these manuals helps to pays for the respective companies to assist their customers with informative manuals and competent personnel that are able to go onto forums and assist those customers.

    Please contact your local dealer with the serial number of your machine and they can get you a quote on replacement manuals.

    I have NON-Part/NON-revenue manuals available (they cover a wide variety of uses. From repair to operation, and most are better oriented toward learning than the original manuals that ship with the machine. (But note: I do not have NON-revenue manuals for a machine as old as a 12S. I might have a few relevant Tech-docs...but I do not know which ones, off hand.)



    The Parts Book, The Electrical Book, The Instruction Manual, and The Operations Manual: all ship with the machine and are considered a "PART" which is sold. I CAN NOT PROVIDE THOSE HERE.
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  10. #110
    Join Date
    Jun 2010
    Posts
    5
    Do you have the Spindle Maint./removal procedure for a Mynx 7500 Gear head?
    Last edited by jhnlrs; 01-11-2019 at 08:35 PM.

  11. #111
    Join Date
    Jan 2019
    Posts
    3

    Re: Does anyone need service manuals for popular Doosan Machines?

    i have an older Puma 2600Y S/N: ML0105-000313, i have an issue with an alarm NO. 2047 TURRET CLAMP SWITCH ALARM OR TURRET CONTROL UNIT ALARM, i have already followed the steps to fix the alarm by taking the back of the turret off and checking the distance form the dog and the switch(0.4 mm) i also unclamped and tried resetting the alarms and nothing happened, still have the same alarm. all i have is the operating manual and wiring diagram/ladder book, im also thinking im missing a manual or two,im fairly new to cnc repair seen but this is the first one that has me stumped. Any help would be most appreciated, Thanks

  12. #112
    Join Date
    Feb 2013
    Posts
    788

    Re: Does anyone need service manuals for popular Doosan Machines?

    Quote Originally Posted by jhnlrs View Post
    Do you have the Spindle Maint./removal procedure for a Mynx 7500 Gear head?
    Sorry. I do not.
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  13. #113
    Join Date
    Feb 2013
    Posts
    788

    Re: Does anyone need service manuals for popular Doosan Machines?

    Quote Originally Posted by the16vkid View Post
    i have an older Puma 2600Y S/N: ML0105-000313, i have an issue with an alarm NO. 2047 TURRET CLAMP SWITCH ALARM OR TURRET CONTROL UNIT ALARM, i have already followed the steps to fix the alarm by taking the back of the turret off and checking the distance form the dog and the switch(0.4 mm) i also unclamped and tried resetting the alarms and nothing happened, still have the same alarm. all i have is the operating manual and wiring diagram/ladder book, im also thinking im missing a manual or two,im fairly new to cnc repair seen but this is the first one that has me stumped. Any help would be most appreciated, Thanks
    As you are postin here (this thread) I assume you would like a better service manual.

    I attached one.
    This is for the little brother of your machine. Procedures are similar, but use your parts book for the correct part numbers.
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  14. #114
    Join Date
    Jan 2019
    Posts
    3

    Re: Does anyone need service manuals for popular Doosan Machines?

    thank you for the help on the 2600Y, i was able to get everything all in order. i do however have another issue that ive been looking at but doosan has been unresponsive in my efforts to get help, i have a puma 18 S/N PM180009, our tail stock has been having bearing issues and am looking to rebuild the tailstock. i was looking for any procedure for this process, i have several machine manuals but nothing to do with this particular machine, as always thank you for the help dhardt.

  15. #115
    Join Date
    Nov 2006
    Posts
    175

    Re: Does anyone need service manuals for popular Doosan Machines?

    I wonder if exist a manual for connection a Puma for example to Fanuc robot?

  16. #116
    Join Date
    May 2019
    Posts
    1
    Hi I have a problem on a Doosan Lynx 220L when i index the turret it goes round and round wit out stopping Please help
    Thanks
    Leon Collatz
    Cape Town
    South Africa

  17. #117
    Join Date
    Jan 2019
    Posts
    3
    I have an old DOOSAN PUMA 400MB and my boss wants to change out the bearings in the tail stock and was wondering if theirs a procedure i can follow for this, thank you

  18. #118
    Join Date
    Apr 2018
    Posts
    7

    Re: Does anyone need service manuals for popular Doosan Machines?

    Do you have one for MX, ST 35GS manual?





  19. #119
    Join Date
    Feb 2013
    Posts
    788

    Re: Does anyone need service manuals for popular Doosan Machines?

    Quote Originally Posted by youngdoo View Post
    Do you have one for MX, ST 35GS manual?




    I notice that you are in Korea. Doosan Korea has the same (and more) manuals, written in Hangul.
    Would you rather have those?
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  20. #120
    Join Date
    Apr 2018
    Posts
    7
    Quote Originally Posted by dhardt View Post
    I notice that you are in Korea. Doosan Korea has the same (and more) manuals, written in Hangul.
    Would you rather have those?
    Yes. Thank you

Page 6 of 9 45678

Similar Threads

  1. Accurpress Service Manuals
    By FusionMachine in forum Bending, Forging, Extrusion...
    Replies: 0
    Last Post: 11-12-2012, 12:23 AM
  2. Doosan Daewoo ForkLift Service Manual
    By VikingCAD13 in forum Daewoo/Doosan
    Replies: 2
    Last Post: 07-02-2012, 06:52 PM
  3. Service manuals
    By sixthearl in forum Haas Mills
    Replies: 4
    Last Post: 10-11-2009, 08:26 AM
  4. Maintenance or service manuals
    By bigbobomb in forum Fanuc
    Replies: 0
    Last Post: 11-13-2008, 02:32 AM
  5. Hurco service manuals required
    By Graham S in forum Waterjet General Topics
    Replies: 1
    Last Post: 12-12-2005, 03:15 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •