506,071 active members
3,740 visitors online
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > Does anyone need service manuals for popular Doosan Machines?
Page 10 of 11 891011
Results 109 to 120 of 130
  1. #109
    Registered
    Join Date
    Feb 2013
    Posts
    583

    Re: Does anyone need service manuals for popular Doosan Machines?

    Quote Originally Posted by Tallg View Post
    dhardt,

    I need a full set of manuals for a 12S-B lathe.
    Serial number PS100977.
    Fanuc O-T control
    I do not need programming or operation manual.
    Need parts manual, maintenance manual and especially electrical.
    I purchased the machine and the manuals were lost during shipment.
    The Parts Book, The Electrical Book, The Instruction Manual, and The Operations Manual: all ship with the machine and are considered a "PART" which is sold. I CAN NOT PROVIDE THOSE HERE.

    These are Doosan parts that are sold. The revenue from these manuals helps to pays for the respective companies to assist their customers with informative manuals and competent personnel that are able to go onto forums and assist those customers.

    Please contact your local dealer with the serial number of your machine and they can get you a quote on replacement manuals.

    I have NON-Part/NON-revenue manuals available (they cover a wide variety of uses. From repair to operation, and most are better oriented toward learning than the original manuals that ship with the machine. (But note: I do not have NON-revenue manuals for a machine as old as a 12S. I might have a few relevant Tech-docs...but I do not know which ones, off hand.)



    The Parts Book, The Electrical Book, The Instruction Manual, and The Operations Manual: all ship with the machine and are considered a "PART" which is sold. I CAN NOT PROVIDE THOSE HERE.
    Doosan Service Technician
    darryl.hardt@doosanmt.com O:973-618-2461 M:973-803-9479

  2. #110
    Junior Member
    Join Date
    Jun 2010
    Posts
    5
    Do you have the Spindle Maint./removal procedure for a Mynx 7500 Gear head?
    Last edited by jhnlrs; 01-11-2019 at 08:35 PM.

  3. #111
    Member
    Join Date
    Jan 2019
    Posts
    3

    Re: Does anyone need service manuals for popular Doosan Machines?

    i have an older Puma 2600Y S/N: ML0105-000313, i have an issue with an alarm NO. 2047 TURRET CLAMP SWITCH ALARM OR TURRET CONTROL UNIT ALARM, i have already followed the steps to fix the alarm by taking the back of the turret off and checking the distance form the dog and the switch(0.4 mm) i also unclamped and tried resetting the alarms and nothing happened, still have the same alarm. all i have is the operating manual and wiring diagram/ladder book, im also thinking im missing a manual or two,im fairly new to cnc repair seen but this is the first one that has me stumped. Any help would be most appreciated, Thanks

  4. #112
    Registered
    Join Date
    Feb 2013
    Posts
    583

    Re: Does anyone need service manuals for popular Doosan Machines?

    Quote Originally Posted by jhnlrs View Post
    Do you have the Spindle Maint./removal procedure for a Mynx 7500 Gear head?
    Sorry. I do not.
    Doosan Service Technician
    darryl.hardt@doosanmt.com O:973-618-2461 M:973-803-9479

  5. #113
    Registered
    Join Date
    Feb 2013
    Posts
    583

    Re: Does anyone need service manuals for popular Doosan Machines?

    Quote Originally Posted by the16vkid View Post
    i have an older Puma 2600Y S/N: ML0105-000313, i have an issue with an alarm NO. 2047 TURRET CLAMP SWITCH ALARM OR TURRET CONTROL UNIT ALARM, i have already followed the steps to fix the alarm by taking the back of the turret off and checking the distance form the dog and the switch(0.4 mm) i also unclamped and tried resetting the alarms and nothing happened, still have the same alarm. all i have is the operating manual and wiring diagram/ladder book, im also thinking im missing a manual or two,im fairly new to cnc repair seen but this is the first one that has me stumped. Any help would be most appreciated, Thanks
    As you are postin here (this thread) I assume you would like a better service manual.

    I attached one.
    This is for the little brother of your machine. Procedures are similar, but use your parts book for the correct part numbers.
    Doosan Service Technician
    darryl.hardt@doosanmt.com O:973-618-2461 M:973-803-9479

  6. #114
    Member
    Join Date
    Jan 2019
    Posts
    3

    Re: Does anyone need service manuals for popular Doosan Machines?

    thank you for the help on the 2600Y, i was able to get everything all in order. i do however have another issue that ive been looking at but doosan has been unresponsive in my efforts to get help, i have a puma 18 S/N PM180009, our tail stock has been having bearing issues and am looking to rebuild the tailstock. i was looking for any procedure for this process, i have several machine manuals but nothing to do with this particular machine, as always thank you for the help dhardt.

  7. #115
    Registered
    Join Date
    Nov 2006
    Posts
    174

    Re: Does anyone need service manuals for popular Doosan Machines?

    I wonder if exist a manual for connection a Puma for example to Fanuc robot?

  8. #116
    Member
    Join Date
    May 2019
    Posts
    1
    Hi I have a problem on a Doosan Lynx 220L when i index the turret it goes round and round wit out stopping Please help
    Thanks
    Leon Collatz
    Cape Town
    South Africa

  9. #117
    Member
    Join Date
    Jan 2019
    Posts
    3
    I have an old DOOSAN PUMA 400MB and my boss wants to change out the bearings in the tail stock and was wondering if theirs a procedure i can follow for this, thank you

  10. #118
    Registered
    Join Date
    Apr 2018
    Posts
    7

    Re: Does anyone need service manuals for popular Doosan Machines?

    Do you have one for MX, ST 35GS manual?





  11. #119
    Registered
    Join Date
    Feb 2013
    Posts
    583

    Re: Does anyone need service manuals for popular Doosan Machines?

    Quote Originally Posted by youngdoo View Post
    Do you have one for MX, ST 35GS manual?




    I notice that you are in Korea. Doosan Korea has the same (and more) manuals, written in Hangul.
    Would you rather have those?
    Doosan Service Technician
    darryl.hardt@doosanmt.com O:973-618-2461 M:973-803-9479

  12. #120
    Registered
    Join Date
    Apr 2018
    Posts
    7
    Quote Originally Posted by dhardt View Post
    I notice that you are in Korea. Doosan Korea has the same (and more) manuals, written in Hangul.
    Would you rather have those?
    Yes. Thank you

Page 10 of 11 891011

Similar Threads

  1. Accurpress Service Manuals
    By FusionMachine in forum Bending, Forging, Extrusion...
    Replies: 0
    Last Post: 11-12-2012, 12:23 AM
  2. Doosan Daewoo ForkLift Service Manual
    By VikingCAD13 in forum Daewoo/Doosan
    Replies: 2
    Last Post: 07-02-2012, 06:52 PM
  3. Service manuals
    By sixthearl in forum Haas Mills
    Replies: 4
    Last Post: 10-11-2009, 08:26 AM
  4. Maintenance or service manuals
    By bigbobomb in forum Fanuc
    Replies: 0
    Last Post: 11-13-2008, 02:32 AM
  5. Hurco service manuals required
    By Graham S in forum General Waterjet
    Replies: 1
    Last Post: 12-12-2005, 03:15 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •