Please help...!!
I am using AMS MCV-400 VMC . Now For simplicity and 3D modelling I decided to connect with PC . I have a ready RS232C Cable and PC . But the MAchine not responding.
The Parameter number 100 , 101 are unable to edit since it is " WRITE-PROTECTED". When tried to change the " PARAMETER WRITE : 0 " to " PARAMETER WRITE : 1 " It cannot changed . It remains at 0 . and shows alarm message again as Write-Protected .
I have VMC machine with RS232C port
Fanuc i0 Mate -MB
Please Help Meee... __/\__