Hi Friends,
I want to use Arduino duemilanove + GRBL firmware to control LiniStepper Unipolar driver.
My question is can i use GRBL (without GRBL shield, just as stepper controller) to drive unipolar steppers. I don't want to use Unipolar steppers in bipolar mode.
Any help or information is appreciated.
-Raghu
Results 1 to 3 of 3
-
08-24-2014, 06:07 AM #1
Registered
- Join Date
- Jun 2013
- Posts
- 1
GRBL with unipolar Steppers Information required
-
08-24-2014, 05:28 PM #2
Gold Member
- Join Date
- Jan 2010
- Posts
- 2141
Re: GRBL with unipolar Steppers Information required
Yes.
GRBL does not care whether it is controlling a bipolar driver or a unipolar driver. It will work with both types of drivers and motors.
I have used GRBL to drive a Linistepper.
-
12-03-2015, 09:07 PM #3
Junior Member
- Join Date
- Dec 2006
- Posts
- 18
Look here... if you understand something...
Originally Posted by mb.raghavendra
http://forum.arduino.cc/index.php?topic=208099
Reply With QuoteSimilar Threads
-
Driving Steppers as both Unipolar and Bipolar?
By Brian.Holiday in forum CNC Machine Related ElectronicsReplies: 0Last Post: 12-01-2010, 02:39 PM -
Unipolar Steppers
By Drools in forum DIY CNC Router Table MachinesReplies: 4Last Post: 03-19-2009, 01:37 AM -
Unipolar steppers and drivers?
By DukerX in forum Stepper Motors / DrivesReplies: 0Last Post: 08-27-2005, 09:43 PM -
power of using unipolar steppers?
By dowling177 in forum Stepper Motors / DrivesReplies: 1Last Post: 01-12-2005, 03:10 AM
Tags for this Thread
Posting Permissions
