I've searched the internet high and low for these files and have not been able to find them.I have measurements but don't have the skill to design the CAD. Is there anyone that can help?
I've searched the internet high and low for these files and have not been able to find them.I have measurements but don't have the skill to design the CAD. Is there anyone that can help?
Broknindarkagai,
Post a sketch with dimensions, or a picture if possible.
Jeff...
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
I am trying to make something like the last image. I'm using 2 inch thick HDPE to make 2 inch spacers. Thank you Jeff!
Note : Measurements are in inches
Rear Strut Spacer
Attachment 247582
Front Strut Spacer
Attachment 247584
Example of finished product
Attachment 247586
Here you go.
Mike
I'm sorry I should have been more clear. I'm need 3D models. I'm running a Roland MDX-20
Here is the 3D model in Solidworks format. You have to double check model, I am not responsible for dimensional accuracy
Good Luck
Mike