Hi Guys,

I am having touble getting my machine going and I believe it's because the original config files on the hard drive in the MMC have been overwritten with bad ones. After everything has been reloaded it is acting like some of the I/O isn't configured properly on the PLC. I can power on the machine and some things work while others seem like they aren't even configured in the PLC. For example I can unclamp the turret but not turn it. I can't move the tailstock. Hydraulics start up, coolant works, the encoders are working, switches on the control panel register, and a few other small things work.

Does anyone have a backup file from an HIT-8S, or any of the config files for one? I can get into the hard drive directly with it connected to a PC and also have a copy of PCLink.