584,846 active members*
3,984 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2014
    Posts
    2

    Jungner 560 Y Axis Ballscrew

    I have been elected to the position of ballscrew expert at work. :drowning:
    We have a Jungner 560 needing a Y axis ballscrew rebuilt/replaced. We have several old ballscrews on hand but none have been tagged as to machine, axis, etc...

    Here is the problem...the boss wants a rebuilt Y axis on hand and ready to pop in the machine. I need to see if we can identify one we have on hand as the correct one.
    Does anyone out there have specs, part #, pictures, any info that may be of help?

  2. #2
    Join Date
    Jun 2004
    Posts
    511

    Re: Jungner 560 Y Axis Ballscrew

    Jungner is not supported in the US. We have one, and the only info I could find was from an old dealer in the New England area.

  3. #3
    Join Date
    Oct 2005
    Posts
    859

    Re: Jungner 560 Y Axis Ballscrew

    Jungner no longer has service dealers in the US. Y axis Ball screw made by IBL part numbers on screw nut include 73-09252-01 and 032-05-03-0437-878 (I can not find a cross reference to it on Thompson site). The screw is 32 mm RH pitch 5mm. It has a 25mm bearing diameter on the end with a smaller 19mm extended from there. The nut has a 48mm diameter (D1) and a flange with a 60mm BHC. These appear to be special made nuts for Jungner as they do not spec to the shelf parts.

    My email is [email protected] and I once serviced Jungner machines in the USA. I do not have numbers on all the other parts but may be able to get them if my contacts can help.

    Yes I can get full dims for the screw currently I have a used one I will be sending out for rebuild for a company now.

Similar Threads

  1. Jungner Grinders
    By tjones in forum Toolgrinding / Toolgrinding Machines
    Replies: 5
    Last Post: 09-10-2014, 02:07 PM
  2. Jungner
    By ifixcnc in forum Toolgrinding / Toolgrinding Machines
    Replies: 0
    Last Post: 07-24-2013, 06:39 PM
  3. in need of a z axis ballscrew
    By williamsmotower in forum Charter Oak Automation Support Forum
    Replies: 4
    Last Post: 02-08-2012, 05:57 PM
  4. Using a ballscrew on the Z axis
    By uspl in forum Linear and Rotary Motion
    Replies: 3
    Last Post: 05-16-2011, 09:56 PM
  5. VF0 X axis ballscrew
    By Geof in forum Haas Mills
    Replies: 2
    Last Post: 09-20-2006, 06:44 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •