585,991 active members*
6,624 visitors online*
Register for free
Login

Thread: Step Four precise 760 Mach3 setup

Results 1 to 3 of 3
  1. 09-17-2014, 03:32 PM #1
    endocnc
    endocnc is offline Registered
    Join Date
    Sep 2014
    Posts
    2

    Red face Step Four precise 760 Mach3 setup

    Hello i have an Step Four precise 760 cnc Router running xpertmill.

    The company no longer exists so i need a new Software.

    What do i need to run this machine with mach3 ?

    i tryed everything ports and pins, is it the controller ?

    i have the Xpertlink STEP-FOUR - Schneiden und Fr controller connected via USB and Ethernet.

    is this controller useless with mach3 ? it costet me over 1k bucks.

    i want to use 4 axis milling with one rotary.

    thank you in advance
    Reply With Quote Reply With Quote
  2. 09-17-2014, 04:56 PM #2
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35538

    Re: Step Four precise 760 Mach3 setup

    Unless it has a Mach3 plugin, it will not work with Mach3.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
  3. 09-18-2014, 10:55 AM #3
    endocnc
    endocnc is offline Registered
    Join Date
    Sep 2014
    Posts
    2

    Re: Step Four precise 760 Mach3 setup

    Ok thank you, so what do i need to buy to get it working for 3d milling?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. newbie question on step by step cutting setup/ process in Mach3
    By Matt Clara in forum Mach Software (ArtSoft software)
    Replies: 12
    Last Post: 05-27-2014, 07:36 AM
  2. Kflop Dir / Step setup time
    By BobKinsman in forum Dynomotion/Kflop/Kanalog
    Replies: 3
    Last Post: 11-16-2012, 12:10 AM
  3. How to setup this Modbus interfac to mach3,and the schematic where is step,dir output
    By levon18lopez in forum Joes CNC Model 2006
    Replies: 0
    Last Post: 06-11-2010, 03:27 AM
  4. Mach3 Step By Step
    By brouser1 in forum Mach Plasma / Laser
    Replies: 10
    Last Post: 04-09-2010, 03:46 PM
  5. A Axis and Step and Direction Spindle Setup
    By mklb in forum Mach Software (ArtSoft software)
    Replies: 6
    Last Post: 11-27-2009, 02:19 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules