Has anyone used this? It looks like you control a CNC with a PC video game controller.
They say it's only $25. What do you need to make it work. Does it work?
Bob
Results 1 to 2 of 2
-
01-07-2004, 10:07 PM #1
Registered
- Join Date
- Jul 2003
- Posts
- 33
What's this USB Jog Stick Controller CamSoft has?
-
01-08-2004, 05:27 PM #2
Registered
- Join Date
- Apr 2003
- Posts
- 332
Dear Bob,
Its new for Version 15 of CNC Professional and also V5 CNC Lite/Plus. You can take a closer look at the spec's at www.cnccontrols.com/usbjogstick.asp
This unit is more for hobbyist on a budget, but we do have others that are geared toward business or commercial use.
We are advertisers here on CNC Zone so you can just click on the ad or browse the hardware page at www.cnccontrols.com/products2.asp
Tech Support
CamSoft Corp.
(909) 674-8100
[email protected]
www.cnccontrols.com(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Open Source CNC Controller Specification
By gregmary in forum DIY CNC Router Table MachinesReplies: 28Last Post: 12-05-2005, 04:58 AM -
www.lowcostcncretrofits.com jog controller V2.0
By twombo in forum DIY CNC Router Table MachinesReplies: 0Last Post: 06-06-2005, 06:54 PM -
camsoft proffessional controller
By ajc in forum CamSoft ProductsReplies: 0Last Post: 04-25-2005, 12:28 PM -
USB Stepper Controller
By High Seas in forum CNC Machine Related ElectronicsReplies: 1Last Post: 12-23-2003, 06:25 PM
Posting Permissions
