[liston336]

Hey,
Just wondering if anyone has a resource for documentation ( prints, schematics, manuals) for a westinghouse HL-82 co-ord system, a HL-8 tracing head, and Koike hybrid NC D-2 unit. I have received some fron Koike Aronson, but nothing at all on the hydrid system. I am setting up a used, bought at auction, machine for a customer. I will gladly paid for manuals , even if they are scanned.

[CNCTECHNICIAN1]

What have you received from Koike? I don't want to resend what Koike already has sent. I have alot of Koike stuff. I am certified through there schooling.

[liston336]

cnctechinican1,
They sent a parts breakdown of the HL-8 head, templates prep. paperwork,
and amplifier schematics. I need the manual on the Koike Hybrid NC D-2, and the HL-82 coord tracing controls. Any and all you can send will help. My email is [email protected]. If there is any cost involved please let me know. thanks for your help. I will be picking your brain also if I can't make it work.
Thanks,
Liston336

[m230042]

good luck with that. I believe the koike d-2 was used on 30 or so Ik machines. It was made in japan by koike and has been obsolete since the mid 80's. It ran on two simtek friction drive encoders and injected it's drive siginal at the start of the drive amp. The parts for the wescan drive are available but have 2-3 month leed time. I used to work at Koike as a field service tech and I wouldn't touch it.

What is it doing and not doing?

[jrweikle]

i know this is a very old thread but thought it would be worth the time
can i be sent whatever info you have

i too have acquired on of these units