584,854 active members*
4,322 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    Oct 2014
    Posts
    2

    Discovery 308 speed control

    Thanks in advance, can anyone tell me how to change the spindle rpm. I found out how to change feed rate I now need to know how to adjust the spindle rpm.

  2. #2
    Join Date
    Nov 2004
    Posts
    3028

    Re: Discovery 308 speed control

    DX-32 control? It has a spindle drive. Look for STM. Input a Speed, just press enter to skip T, and a M3. You may have to press start. You need a operating manual.
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  3. #3
    Join Date
    Oct 2014
    Posts
    2

    Re: Discovery 308 speed control

    Yes a dx-32 control. The STM will not alter or adjust the once the program is running. I'm thinking it should be like adjusting the feed rate while the program is running just for the spindle.
    Thanks

  4. #4
    Join Date
    Nov 2004
    Posts
    3028

    Re: Discovery 308 speed control

    It depends on the version of software. Could be arrow up/down, or +/- keys.
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  5. #5
    Join Date
    Sep 2009
    Posts
    3

    Re: Discovery 308 speed control

    Quote Originally Posted by machintek View Post
    It depends on the version of software. Could be arrow up/down, or +/- keys.
    I assume you have a S command in the program and want to over-ride it while running the program? There is a jog +/- button on the control panel, turn to + and push it to increase. - to decrease.

Similar Threads

  1. 180V DC Motor Speed control Neco speed controller card - PLEASE HELP
    By gridevolver in forum CNC Machine Related Electronics
    Replies: 5
    Last Post: 01-22-2019, 06:44 PM
  2. Damp? Sieg X1 speed control and stepper control.
    By Memran in forum CNC Machine Related Electronics
    Replies: 1
    Last Post: 02-05-2014, 10:16 PM
  3. Cutting speed locked to Z torch height control speed
    By Beefy in forum Mach Plasma / Laser
    Replies: 1
    Last Post: 02-15-2010, 12:14 AM
  4. BPSeriesI / Centroid control- Spindle speed all out of whack with speed dial?
    By peter.blais in forum Bridgeport / Hardinge Mills
    Replies: 9
    Last Post: 08-08-2006, 09:29 AM
  5. Bridgeport Discovery 308 W/SX-15 Control Start up disk needed
    By Richardd in forum Bridgeport / Hardinge Mills
    Replies: 1
    Last Post: 07-10-2006, 02:07 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •