[Novett]

hi
I`m hoping someone can check my wiring. I have a Antek 70 dc power supply that I wired
in parallel to maximum current to my servo motors. I used red for + and – for black. I haven`t
tested my wiring … I`m hoping for verification before I power up the supply. This supply has
dual outputs at 10 amps each.
Attachment 252860

[john-100]

thats how I'd connect the outputs in parallel

[Novett]

Thanks for the info. Just powered up the new wiring and everything looks good.

[Al_The_Man]

If you have four motors or even three, you can also split the supplies between each pair, instead of paralleling.
Al..