584,812 active members*
5,443 visitors online*
Register for free
Login
IndustryArena Forum > Employment Opportunity / RFQ (Request for Quote). > RFQ (Request for Quote) > Melb: Aluminium spacers, small run, CAD/CNC if possible but not essential, pic inside
Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2007
    Posts
    4

    Melb: Aluminium spacers, small run, CAD/CNC if possible but not essential, pic inside

    Hey all, been a while, I trust you are all well?

    Looking for someone to machine up a few spacers similar to the attached (Pic is copyright of Projection Components UK of course) for motorcycle suspension.

    Length is around 120mm, 60mm square of the top of my head. I can supply complete measurement when the time comes, or we can meet & you can take your own. CAD would be nice so we can make more as we need, but not essential. Material should be 6082-T6 aluminium, but open to suggestions. Probably 1-5 piece run.

    Also need another version, top mount will be the same, bottom mount be an eyelet instead of a clevis, 1 Piece only at this stage for proof of concept.

    Thanks for looking!

    Cheers, Mick.

  2. #2
    Join Date
    May 2015
    Posts
    6

    Re: Melb: Aluminium spacers, small run, CAD/CNC if possible but not essential, pic in

    wher ein melbourne are you? do you have tech drawings for them or file?

  3. #3
    Join Date
    Jul 2015
    Posts
    1

    Re: Melb: Aluminium spacers, small run, CAD/CNC if possible but not essential, pic in

    Hi is this RFQ still open?

Similar Threads

  1. Small Aluminium Box
    By Mlewin in forum North America RFQ's
    Replies: 8
    Last Post: 07-10-2015, 05:55 PM
  2. Small Spacers - Turning
    By levelzero in forum RFQ (Request for Quote)
    Replies: 1
    Last Post: 05-15-2011, 07:55 AM
  3. RFQ small aluminium rail QTH 30
    By alphatroniqu in forum RFQ (Request for Quote)
    Replies: 41
    Last Post: 03-17-2011, 04:57 PM
  4. Aluminium Drilling - Small Bit
    By Bryan GD in forum MetalWork Discussion
    Replies: 11
    Last Post: 07-14-2008, 04:34 AM
  5. Diameter of inside cut, too small
    By SVM in forum Uncategorised CAM Discussion
    Replies: 16
    Last Post: 06-19-2006, 03:17 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •