[siprogressio]

Hello!

We have a used SELCA S3045. We had to update server/network information (IP and shared folder name) following SELCA specified procedure (backup of options on flopy, restart, decod/codifica, update, and install options to HDU). We follwoed same process on 2 other machines sucessfully.

But on one of the machines we get the follwoing error on restart (bootup screen)
Can't find/read G:\TCPIP.SYS,
Can't find/read G:\ETHDEV.sys

We tired to remo the networking option from HDU - "Elimina da HDU" but we get the following error - "Errore sul disco".

Is there a way to delete/reinstall files manually? Any way to boot into "command prompt"?
Maybe we could fromat the HDU from the HIM - could that be a solution?

Any jelp would be much appreciated as we try to solve problem...


Best regards,
Luka

[fp_pereira]

hello

To solve the "Errore sul disco" you must choose the option softkey "utilita" ---->"prepara Hard disk"
About

Can't find/read G:\TCPIP.SYS,
Can't find/read G:\ETHDEV.sys

Before to install the option Rete NFS, be sure to have at list 2MG free on the memory ram

1- format disk "prepara disco"
2- 2MG on the memory ram
3- install the option

if you need the software selnet.. or another question contact me