Hello everybody,
I have purchased the 2M656 stepper driver (http://www.jmc-motion.com/en/product/show.php?id=16), but I had before the hobbycnc board and i built the tachus42 and it was easy to connect both boards directly to parallel port.
The problem is the 2M656 driver has inputs as follows : pls+ pls- dir+ dir- ena+ ena- and i got confused how to connect them to the parallel port ?!
Thx in advance for your help.
Results 1 to 2 of 2
-
10-15-2014, 05:17 PM #1
Registered
- Join Date
- Mar 2006
- Posts
- 58
Need help regarding microstepping driver 2M656
-
10-16-2014, 05:33 AM #2
Registered
- Join Date
- May 2005
- Posts
- 1397
Re: Need help regarding microstepping driver 2M656
Shouldn't the supplier provide support? Shouldn't they answer your question? When I sell a driver, I answer my customers questions...
James hosts the single best wiki page about steppers for CNC hobbyists on the net:
http://www.piclist.com/techref/io/steppers.htm Disagree? Tell him what's missing! ,o)
Reply With QuoteSimilar Threads
-
PIc and L298 stepper driver with microstepping
By mrendu43 in forum Stepper Motors / DrivesReplies: 3Last Post: 09-25-2012, 12:10 AM -
Driver for microstepping
By schneiderj in forum Stepper Motors / DrivesReplies: 7Last Post: 11-12-2010, 01:11 AM -
Microstepping driver too easy.
By bunalmis in forum Stepper Motors / DrivesReplies: 19Last Post: 01-20-2009, 11:21 AM -
supply microstepping driver
By claudia in forum News AnnouncementsReplies: 0Last Post: 01-16-2007, 09:26 AM -
NEW Arcsin microstepping motor driver
By cnc2k in forum Stepper Motors / DrivesReplies: 2Last Post: 04-30-2005, 04:13 AM
Tags for this Thread
Posting Permissions
