Hi - I am considering the new Leadshine MX4660 and KL34H260-60-4A for my new CRP Pro 4860 build. The Leadshine has 4 outputs at up to 60V/6A and the KL34H260-60-4A is a 465-oz/6A motor (1.7mH inductance). I plan to keep the dual X and Z motors at 5.35A via DIP switches. The spindle would be a 2.2KW water cooled. Is this a good driver/motor combination for cutting mainly exotic hardwood/plywood/corrian and some aluminum? Thanks.