548,605 active members*
2,369 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Mastercam > mastercam x5 toolpaths
Results 1 to 6 of 6
  1. #1
    Registered
    Join Date
    Oct 2014
    Posts
    4

    mastercam x5 toolpaths

    is there any one out there would be able to do a team viewer session with me on apart were trying to get turned that can help use write the tool paths

    thanks
    Russell myers

  2. #2
    Community Moderator cadcam's Avatar
    Join Date
    Apr 2003
    Posts
    3565

    Re: mastercam x5 toolpaths

    Did you get this done? are you still needing help. I do go to meetings to do this but there is also a charge so you know.
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .

  3. #3
    Registered
    Join Date
    Oct 2014
    Posts
    4

    Re: mastercam x5 toolpaths

    Yes we still need help what would the charge be and when wou l you be available

  4. #4
    Community Moderator cadcam's Avatar
    Join Date
    Apr 2003
    Posts
    3565

    Re: mastercam x5 toolpaths

    Best way to do this is to click on my name and go to Visit homepage and there you will find contact info to take this further.
    regards,
    cadcam
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .

  5. #5
    Registered
    Join Date
    Oct 2014
    Posts
    4

    Re: mastercam x5 toolpaths

    I sent you guys an email

  6. #6
    Community Moderator cadcam's Avatar
    Join Date
    Apr 2003
    Posts
    3565

    Re: mastercam x5 toolpaths

    And I am back in the office and reply-ed back.
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .

Similar Threads

  1. How to hide toolpaths in MasterCAM?
    By kender in forum Mastercam
    Replies: 7
    Last Post: 08-07-2010, 07:53 AM
  2. NEW: TFM - Mastercam Surfacing High Speed Toolpaths Training CD
    By Mike Mattera in forum News Announcements
    Replies: 0
    Last Post: 07-14-2010, 05:30 PM
  3. Replies: 0
    Last Post: 07-14-2010, 05:28 PM
  4. Replies: 5
    Last Post: 03-28-2008, 07:34 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •