584,865 active members*
4,876 visitors online*
Register for free
Login
IndustryArena Forum > Manufacturing Processes > Milling > The Analysis of Machine Tool Industry Output and Consumption Worldwide(Ⅱ)
Results 1 to 1 of 1
  1. #1

    The Analysis of Machine Tool Industry Output and Consumption Worldwide(Ⅱ)


    The Analysis of Machine Tool Industry Output and Consumption Worldwide(Ⅱ)
    --The Output of Machine Tool Worldwide in 2013

    In the rank list of machine tool manufacturing countries, the first ten countries and regions are same to 2012, the difference is some of the countries’position varied. Especially, the position of Germany and Japan exchanged, Italy exchanged with South Korea, and USA exchanged with Taiwan, China.


    About the first three countries, the total output value was 57% of the total amount, the rate of Germany gent up obviously. The total 57% was lower than 60% in 2012. China was still the first position and had 22.8% share. It’s output value went down 12%, compared with 2012. After 5% down compared to 2011, in the 2 years, it declined continuously.

    Germany was the winner in 2013, getting 4% increased, say, 11.15 Billion Euros by the advantages of machine tool industry. So the percentage point of Germany in the global market increased 2.9, up to 18.9%.

    About Japan, if calculated by Japanese Yen, the output value decreased 18%, and 35% declined, up to 9.2 Billion if calculated by Euros, because the Japanese Yen devalued much to Euros. Except the exchange rate effect, the main cause of Japan machine tool output value gent down was that the requirement of its trade partner, China, declined. On the other hand, owing to most of the Japanese company had opened the factory locally, there are 20 companies which is specialized in metal turning and milling machine opening the factory in China.

    As for the other countries in Europe, machine tool industry of Italy was recovering, the rank of other European countries did not change apparently.

    In details, the second machine tool manufacturing country, Italy, shared 7.3% market share, although the output value declined slightly, the market share rank increase to fourth. South Korea decreased 6% to 6.8%, ranked fifth.U.S. decreased 1%, ranked sixth. China Taiwan decreased 16% to 5.8%, ranked seventh. Switzerland went down to 4% by 6% declined, ranked eighth. Another two countries in the first ten countries, Spain and Austria increased 1.6% and 1.4% separately, and ranked ninth and tenth accordingly.

    About China, in 2013, in the field of metal cutting and turning machine and forming machine, the output value were all in the first position. The total output value of metal cutting and forming were 41.1 Billion and 18 Billion Euros in 2013, shared 69% and 31% accordingly. However, there is big difference between metal cutting and forming. The metal cutting value which was related to economic environment closely decreased 17%, the forming value was generally same to 2012.

    Regarding the detailed percentage of metal cutting and forming machine in the whole industry, metal cutting got 84% share, it was in the high level compared to competitors. 83% rate of metal cutting in Switzerland, 82% in Taiwan, 75% in U.S., 71% in Germany and South Korea, 63% in China. In Italy, the share of metal cutting and forming was neck and neck.

    In the rank of metal cutting machine value, Japan got down to third from the first position of 2012, say, 7.7 Billion Euros, 18.8% shared worldwide. China took the first place by 8.5 Billion total output value, 19% declined when compared to 2012, sharing 20.8 of the market share. The big manufacturer Germany decreased 1% and exceeded Japan to second position by total 7.9 Billion Euros, 19.3% shared. In the past several years, as the fourth largest manufacturer of metal cutting machine, Taiwan of China, slid to sixth. At the same time, South Korea and U.S. got one place raised, ranked fourth and fifth by the same market share 6.9%.

    As for the aspect of forming machine, in 2011 and 2012, the forming machine value of China increased 50% and 21%, and 4% increased in 2013. In the total value, forming machine value had got to 37% from 24% of 2010. The total value of forming machine achieved 4.9 Billion, sharing the 27.3% worldwide, remaining the obviously advantage with other rivals. Germany took the second place by 17.8% and 3.2 Billion. Italy was still the third largest forming machine manufacturer, especially in the field of bending technology. In 2013, the forming value of Italy was 2.1 Billion and 11.7%. Japan was in the fourth position by rate of 8.4%. South Korea was fifth one by 6.4%.

    --Edited and Translated by JASU Machinery
    More Professional News of Machine Tool Industry, Please Pay Attention to Bottle blowing machine,Injection blow molding machine,CNC machining center Manufacturers & Suppliers from China-JASU
    Last edited by jasu; 10-18-2014 at 09:35 AM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •