509,738 active members
2,723 visitors online
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > Puma 10HC parameter problem
Results 1 to 6 of 6
  1. #1
    Registered
    Join Date
    Dec 2012
    Posts
    5

    Puma 10HC parameter problem

    Hello all.

    We just bought a used Puma 10HC -95 Fanuc 0T-C
    The problem we have is that the machine was sitting with no battery at the seller.
    We got a parameter list with the machin. But it is not from my machine!!

    Wehere can i get a copy of the parameters to my model? Tryed the Swedish reseller but NO. Thay did not want to help.
    serial PH100479

    my problem is that if i make a program that turns a bit into different diameters. say 20mm, 30mm, and 40mm only one of them is right. The encoder parameter must be wrong. X amaount of puls / mm
    But i cant find what parameter it is.

  2. #2
    Registered
    Join Date
    Feb 2013
    Posts
    599

    Re: Puma 10HC parameter problem

    Quote Originally Posted by Sastrom View Post

    We got a parameter list with the machin. But it is not from my machine!!
    Did you get a list for a generic Puma10HC w/0TC? ...or for a different machine, entirely?
    Doosan Service Technician
    darryl.hardt@doosanmt.com O:973-618-2461 M:973-803-9479

  3. #3
    Registered
    Join Date
    Dec 2012
    Posts
    5

    Re: Puma 10HC parameter problem

    I do not think its fot a Puma 10hc
    the serial on the paramerer list is way of.
    I will see if thr machine specs is printed on the parameter list

  4. #4
    Registered
    Join Date
    Dec 2012
    Posts
    5

    Re: Puma 10HC parameter problem

    The Danish reseller emailed me the copys of the parameters to my mashine.

  5. #5
    Registered
    Join Date
    Dec 2012
    Posts
    5

    Re: Puma 10HC parameter problem

    Anyone know howto transfer the paramers to the machine?
    The files, 2, are in .tap format

  6. #6
    Registered
    Join Date
    Dec 2012
    Posts
    5

    Re: Puma 10HC parameter problem

    Well i'll answer myself.
    Fix the communication parameter manualy.
    The set PWE to 1, go to parameter setting and pusch EOB and Input reading from DNC starts
    Same for diagnose parameters but you should be in diagnose settings and pusch EOB and Input

Similar Threads

  1. daewoo puma 10hc
    By j.lyons in forum Daewoo/Doosan
    Replies: 2
    Last Post: 04-24-2013, 01:59 AM
  2. Deawoo Puma 10hc alarm 27
    By RP Jr. in forum Daewoo/Doosan
    Replies: 0
    Last Post: 07-16-2012, 06:31 PM
  3. Daewoo PUMA 8HC Parameter required
    By usmanfati in forum Daewoo/Doosan
    Replies: 0
    Last Post: 07-14-2012, 08:09 PM
  4. OLD PUMA 6S, 10HC
    By oleggch in forum Daewoo/Doosan
    Replies: 14
    Last Post: 09-15-2011, 01:44 PM
  5. daewoo puma 12lb tape format problem/parameter problem
    By robb12877 in forum Daewoo/Doosan
    Replies: 0
    Last Post: 08-25-2011, 06:13 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •