[Abdullah]

hi buddy
my machne is HITACHI SEIKI 4NE-2.i have problem in my MICON 8 PLC he show HLAT and INTEL alarm. what does it means? can anybody help me !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[guhl]

do you have manual for this PLC?
if not come along this link
https://s3.amazonaws.com/Icarus/DOCU...anuals_447.PDF

[tc429]

do you have manual for this PLC?
if not come along this link
https://s3.amazonaws.com/Icarus/DOCU...anuals_447.PDF

great info- thankful we scrapped our three Hitachi's 20 yrs ago... one had micon8 battery go dead, took a month to get all the data from hitachi thru interpreter. very unfriendly system in my opinion...and only a 2.5mhz Z-80 CPU. weak/cumbersome...sad.

Hitachi Iron was good- but everyone at our shop hated so bad I couldnt talk into retrofit, whole machines went in dumpsters- i blame all that on the unnecessary Micon-8 giving decent machine bad reputation in our shop

Fanuc had built in PMC that could have worked far better and simpler than Micon-8

[shas595]

Hello, you still having trouble with the 4NE? Let me know and i can help you out

John

[Abdullah]

Hello john
i still have problem with my lathe machine its in same condition. still have alarm of HALT and INTEL on MICON 8 PLC due to which doent turn in to ready position. can you help me plzz

[shas595]

Is all of the information in the machine and the ROM?