Hello everyone!
I have a strange problem with PCBGCODE and LINUXCNC. When I generate a drill file with eagle and PCBGCODE, everything seems fine. But when I go to run it in LINUXCNC it spits out "Need tool prepared -Txx- for toolchange"
Now what the heck could that mean???
I created a drill rack file for pcbgcode:
T01 0.3mm 0.000mm 0.350mm 1.5in
T02 0.4mm 0.351mm 0.450mm 1.5in
T03 0.5mm 0.451mm 0.550mm 1.5in
T04 0.6mm 0.551mm 0.650mm 1.5in
T05 0.7mm 0.651mm 0.750mm 1.5in
T06 0.8mm 0.751mm 0.850mm 1.5in
T07 0.9mm 0.851mm 0.950mm 1.5in
T08 1.0mm 0.951mm 1.050mm 1.5in
T09 1.1mm 1.051mm 1.150mm 1.5in
T10 1.2mm 1.151mm 100.00mm 1.5in
And my tool table file for LINUXCNC:
T1 P1 Z0 D.3 ;.3mm PCB Drill Bit
T2 P2 Z0 D.4 ;.4mm PCB Drill Bit
T3 P3 D.5 ;.5mm PCB Drill Bit
T4 P4 D.6 ;.6mm PCB Drill Bit
T5 P5 D.7 ;.7mm PCB Drill Bit
T6 P6 D.8 ;.8mm PCB Drill Bit
T7 P7 D.9 ;.9mm PCB Drill Bit
T8 P8 D1 ;1mm PCB Drill Bit
T9 P9 D1.1 ;1.1mm PCB Drill Bit
T10 P10 D1.2 ;1.2mm PCB Drill Bit
I am reluctant to use the "simple drill code" because I don't want to miss out on any features PCBGCODE has to offer.
What could be happening? Thanks in advance!