Hey guys,
Looking to get a quote for a custom rail and stile router bit. Preferably stacked, please see images for profile I'm looking for.
Thanks,
Mark
Hey guys,
Looking to get a quote for a custom rail and stile router bit. Preferably stacked, please see images for profile I'm looking for.
Thanks,
Mark
That looks to be a fairly standard rail profile, I would think you'd find that on Ebay? I've bought numerous ones similar to that there.
cheers, Ian
It's rumoured that everytime someone buys a TB6560 based board, an engineer cries!
Those were probably made with a shaper.
When using router bits, your choice of profiles will be very limited.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Hi,
Do you have a drawing with call outs for this? Its not the easiest to get you what you want without a drawing of some sort. Thanks
Joe
Dark Metal Machine
Thanks for the replies guys, I looked all over for this router bit. Think Gerry is right that the doors were made with a shaper. I have some cabinets to make and love this style, so looking to get this bit made for my router table.
Joe would this image be helpful?
Attachment 255110
Example of a stacked bit
Attachment 255112
Thanks,
Mark