Does anyone have the PC2CNC xml file for the Sound Logioc Combo board? His webiste link is 404 Not found. I need this to get my spindle control working!
Thank you!!
Noah!
Does anyone have the PC2CNC xml file for the Sound Logioc Combo board? His webiste link is 404 Not found. I need this to get my spindle control working!
Thank you!!
Noah!
Noah,
Sound Logic was sold, you might try joining the Yahoo Group in the attached link:
https://groups.yahoo.com/neo/groups/TMCCNCTHC/info
The file you are looking for may be posted. Please post the outcome.
This is the company that now owns Sound Logic:
Texas Microcircuits Home page
Jeff...
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
Noah,
I found a vendor that might be able to help:
THCDoc
Jeff...
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
I actually received the File from Bob Campbell today! Here is the file!
https://drive.google.com/file/d/0BxA...ew?usp=sharing
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
Bob Campbell reads the Mach3 Yahoo group regularly, if you ever need to contact him.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)