Dear CNC people,
I have a Meldas 60S machine and need to change OT limits after changing and axis motor.
I cannot figure out how to unlock parameter editing. Nothing seems to work.
Anyone knows how to do this?
Thanks in advanced,
Timo,
Croatia
Dear CNC people,
I have a Meldas 60S machine and need to change OT limits after changing and axis motor.
I cannot figure out how to unlock parameter editing. Nothing seems to work.
Anyone knows how to do this?
Thanks in advanced,
Timo,
Croatia
Hallo,
please send me your mailadress to
[email protected]
best regards
Go to PLC-IF screen
Enter 1001 in Device
Enter "M" in mode (without quotations)
Press input key
Go back to parameters screen and you should see machine parameters
Soft OT limits will be under the AXIS parameter screen
To go back to user parameters do the same as above but put "U" in mode (without quotations)
:cheers:
Dear Friend,
I have buy CNC machine , but it parameter is lost, please can u send me parameter back up of MELDAS 60s controller,
I hope i can edit it according to my machine,
my e mail , [email protected]
thanks,
Chinthaka