523,642 active members*
2,807 visitors online*
Register for free
Login

Thread: Meldas 60S

Results 1 to 4 of 4
  1. #1
    Registered
    Join Date
    Feb 2014
    Posts
    1

    Meldas 60S

    Dear CNC people,

    I have a Meldas 60S machine and need to change OT limits after changing and axis motor.
    I cannot figure out how to unlock parameter editing. Nothing seems to work.
    Anyone knows how to do this?

    Thanks in advanced,

    Timo,
    Croatia

  2. #2

    Join Date
    Oct 2003
    Posts
    321

    Re: Meldas 60S

    Hallo,

    please send me your mailadress to
    servotek.service@gmail.com

    best regards

  3. #3
    Registered
    Join Date
    Oct 2006
    Posts
    206

    Re: Meldas 60S

    Go to PLC-IF screen

    Enter 1001 in Device
    Enter "M" in mode (without quotations)
    Press input key

    Go back to parameters screen and you should see machine parameters
    Soft OT limits will be under the AXIS parameter screen

    To go back to user parameters do the same as above but put "U" in mode (without quotations)

    :cheers:

  4. #4
    Registered
    Join Date
    Feb 2009
    Posts
    9

    Re: Meldas 60S

    Dear Friend,
    I have buy CNC machine , but it parameter is lost, please can u send me parameter back up of MELDAS 60s controller,
    I hope i can edit it according to my machine,
    my e mail , chinthaka@servotech.lk

    thanks,
    Chinthaka

Similar Threads

  1. NC Meldas 320
    By Minesterran in forum Mazak, Mitsubishi, Mazatrol
    Replies: 3
    Last Post: 10-05-2012, 02:50 PM
  2. Meldas 60
    By agu in forum Mazak, Mitsubishi, Mazatrol
    Replies: 1
    Last Post: 09-18-2012, 11:13 PM
  3. Meldas-m60
    By CHANDRU in forum Mazak, Mitsubishi, Mazatrol
    Replies: 4
    Last Post: 04-17-2008, 02:44 PM
  4. help with meldas mo
    By ToolC in forum Mazak, Mitsubishi, Mazatrol
    Replies: 1
    Last Post: 02-09-2007, 04:55 PM
  5. DNC for Meldas
    By hpowell in forum Uncategorised CAM Discussion
    Replies: 2
    Last Post: 04-06-2004, 07:18 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •