584,865 active members*
4,913 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2006
    Posts
    222

    F8, jog mode step user value

    Does anybody know how does this works? I get .01mm jog step with the x1 button (F9), how can I get a smaller step resolution?

  2. #2
    Join Date
    Nov 2004
    Posts
    10

    Re: F8, jog mode step user value

    Hi,
    The F9-F10-F11 buttons are for handwheel mode, X1 meand 1 unit per revolution, X10 is 10 units per revolution etc.
    To use the normal jogstep with the keyboard, fill in a te step size in the edit control above F8, then press the button or press F8.
    When now the jog-keys are used they will step the given step-size.
    Regards,
    Bert

Similar Threads

  1. Step Mode and Continius Mode exchanged
    By iron_aro in forum Mach Software (ArtSoft software)
    Replies: 0
    Last Post: 06-04-2014, 05:42 PM
  2. Always Starts with Jog Mode = Step
    By ex-egll in forum Mach Software (ArtSoft software)
    Replies: 5
    Last Post: 07-06-2013, 12:51 AM
  3. kflop step&dir in velocity mode?
    By mmontev in forum Dynomotion/Kflop/Kanalog
    Replies: 4
    Last Post: 06-24-2013, 02:38 AM
  4. Change Cont, Step Mode via Vba?
    By zerodegreec in forum Mach Wizards, Macros, & Addons
    Replies: 0
    Last Post: 01-28-2013, 07:25 AM
  5. Replies: 0
    Last Post: 12-21-2009, 11:35 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •