585,712 active members*
4,218 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > SheetCam > Post Processor Files > Sheetcam Problem - Mach3 strange artifacts in gcode.

Thread: Sheetcam Problem - Mach3 strange artifacts in gcode.

Results 1 to 3 of 3
  1. 04-17-2020, 11:37 AM #1
    mindfulmunchkin
    mindfulmunchkin is offline Registered
    Join Date
    May 2016
    Posts
    12

    Lightbulb Sheetcam Problem - Mach3 strange artifacts in gcode.

    Hi,

    I'm trying to test my plasma cutter and having a bit oh trouble with the post processing,
    Could anybody help me by identifying the reason that my post processor keeps putting these circles in my gcode, When I use the simulate in sheet cam it's not there but when I load it into
    Mach3 it then appears, see the picture below...

    I'm running a floating head, and using the mach3 plasma & stencil THC and also the mp1000 THC.

    Code? NO180.....................???

    .
    Reply With Quote Reply With Quote
  2. 04-17-2020, 12:50 PM #2
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35538

    Re: Sheetcam Problem - Mach3 strange artifacts in gcode.

    Try changing the IJ mode in general config.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
  3. 04-18-2020, 01:30 AM #3
    mindfulmunchkin
    mindfulmunchkin is offline Registered
    Join Date
    May 2016
    Posts
    12

    Re: Sheetcam Problem - Mach3 strange artifacts in gcode.

    Thanks, im a noob
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Mach3 and -gcode problem!!
    By adi7791 in forum Mach Software (ArtSoft software)
    Replies: 2
    Last Post: 01-06-2018, 09:18 PM
  2. Strange problem with Mach3 and Kflop when using MPG
    By xdmattz in forum Dynomotion/Kflop/Kanalog
    Replies: 11
    Last Post: 08-02-2017, 12:31 PM
  3. very strange corner problem, mach3 chopping off arc
    By turbocad6 in forum Mach Software (ArtSoft software)
    Replies: 9
    Last Post: 06-19-2016, 01:34 PM
  4. gcode problem with mach3 (jogging works fine)
    By gurasha in forum Mach Software (ArtSoft software)
    Replies: 3
    Last Post: 11-12-2014, 01:05 AM
  5. Circle artifacts coming up on Mach3 after using waterline in MeshCAM
    By *Jupiter* in forum Mach Mill
    Replies: 2
    Last Post: 07-17-2013, 05:29 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules