584,829 active members*
4,886 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > Doosan Puma TT1800SY - APC "Alarm" on start up
Results 1 to 7 of 7
  1. #1
    Join Date
    Nov 2014
    Posts
    2

    Doosan Puma TT1800SY - APC "Alarm" on start up

    Having problems figuring out what the yellow flashing APC alarm is. We have checked the battery and that does not seem to be the issue. Does anyone else know what may be happening here? Machine will not run, and we keep getting a lubricant pump alarm 2161, but that seems to be functional too.

  2. #2
    Join Date
    Apr 2008
    Posts
    1577

    Re: Doosan Puma TT1800SY - APC "Alarm" on start up

    Welcome to the forum!

    Try the Doosan subforum: http://www.cnczone.com/forums/daewoo-doosan/

    You'll have better luck there

  3. #3
    Join Date
    Feb 2013
    Posts
    788

    Re: Doosan Puma TT1800SY - APC "Alarm" on start up

    Apc alarm is related to the Absolute Pulse Coder and depending on the code number, is either the battery...or the need to reset the home position. What is the code?
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  4. #4

    Re: Doosan Puma TT1800SY - APC "Alarm" on start up

    Quote Originally Posted by Saranac View Post
    Having problems figuring out what the yellow flashing APC alarm is. We have checked the battery and that does not seem to be the issue. Does anyone else know what may be happening here? Machine will not run, and we keep getting a lubricant pump alarm 2161, but that seems to be functional too.
    Hi
    you need to replace the new battery APC, then reset the home position by produce operation manual book inside

  5. #5
    Join Date
    Jun 2015
    Posts
    11

    Re: Doosan Puma TT1800SY - APC "Alarm" on start up

    Hello,
    I have changed the battery and also set the machine to it reference point , but when ever i turned the machine off and put it on next day the machine shows me same alarm , i have changed the battery two times after this alarm but the issue is not solved please help me

  6. #6
    Join Date
    Jun 2015
    Posts
    11

    Re: Doosan Puma TT1800SY - APC "Alarm" on start up

    Hello Dear ,
    I have changed the battery and also set the machine to it reference point , but when ever i turned the machine off and put it on next day the machine shows me same alarm , i have changed the battery two times after this alarm but the issue is not solved please help me

  7. #7
    Join Date
    Feb 2013
    Posts
    788

    Re: Doosan Puma TT1800SY - APC "Alarm" on start up

    If you pull the battery and read the resistance of the pins remaining on the controller. If the resistance is very low, remove the cables (one at a time) and check the resistance again. If removing a cable drastically increases the resistance then one of the cables or its moror/encoder has issues.
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

Similar Threads

  1. Replies: 2
    Last Post: 09-10-2018, 09:21 PM
  2. Doosan Z290SMY - " Two Turret Processing "
    By Heavy_Metal in forum Daewoo/Doosan
    Replies: 2
    Last Post: 02-28-2014, 06:00 PM
  3. Replies: 3
    Last Post: 12-11-2013, 04:01 PM
  4. X Axis "Goes Off Pattern", "Awry", "Skewed", "Travels"
    By DaDaDaddio in forum Laser Engraving / Cutting Machine General Topics
    Replies: 1
    Last Post: 05-06-2013, 09:59 AM
  5. TT1800SY move "B" after M310
    By Don18P in forum Daewoo/Doosan
    Replies: 4
    Last Post: 01-04-2013, 06:53 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •