Can you just add parallel port(s) to a regular stationary pc and make it work with mach3? Isn't there something about some port address' that need to be correct for it to work?
I'll greatly appreciate any advice thx!
Results 1 to 2 of 2
-
11-26-2014, 06:27 PM #1
Registered
- Join Date
- Sep 2014
- Posts
- 51
no new computers have parallel?? experience on adding parallel port yourself?
-
11-26-2014, 07:18 PM #2
Gold Member
- Join Date
- Jun 2004
- Posts
- 6618
Re: no new computers have parallel?? experience on adding parallel port yourself?
You can use add in cards. You will find the correct port address to put into Mach 3 under the Device Manager in the Windows control panel after it is installed.
Lee
Reply With QuoteSimilar Threads
-
Adding a second parallel port for sherline setup
By captianpattson in forum Benchtop MachinesReplies: 5Last Post: 09-20-2012, 08:37 PM -
Adding pci parallel port
By RedLabel in forum CNC Machine Related ElectronicsReplies: 4Last Post: 11-30-2009, 03:07 AM -
parallel port or parallel universe
By bruno34 in forum Taig Mills / LathesReplies: 5Last Post: 04-15-2009, 04:58 PM -
Where's the parallel port?
By cdlenterprises in forum MastercamReplies: 23Last Post: 01-21-2007, 12:23 AM -
2nd PCI Parallel Port
By sunmix in forum Mach Software (ArtSoft software)Replies: 8Last Post: 11-22-2006, 09:17 PM
Tags for this Thread
Posting Permissions
